|
archiving of SOWACS proudly sponsored by |
![]() |
NOTE: To get off this list, send email to majordomo@aqua.ccwr.ac.za with the body of the message containing the line: unsubscribe sowacs I recently went through the exercise of calculating the "Chi ratio" of the standard count procedure using the equations in the CPN 503 DR neutron probe manual and comparing them to the "Chi ratio" displayed on the instrument. Two different neutron probes were used and three standard counts were done on each instrument. The results were : Instrument number 706 Automatic Manual Chi ratio Chi ratio 1.07 1.51 0.98 1.39 0.88 1.28 Instrument number 3521 0.97 1.37 1.23 1.74 1.01 1.43 "Automatic Chi ratio" is the reading on the neutron probe display and "Manual Chi ratio" is the calculated value. I would be interested in comparing notes to see if my situation is unique. Gregg Dill _______________________________________________ > Gregg Dill, P.Eng., Irrigation Specialist > Alberta Agriculture, Food and Rural Development > Agriculture Center > 100, 5401 - 1st Avenue South > Lethbridge, Alberta, Canada T1J 4V6 > Telephone +1 403-381-5136 FAX +1 403-382-4526 >______________________________________________