SOWACS: Reading gypsum blocks with a Watermark???

[Tom Thomson]

Tom Thomson writes to the sowacs list:
===8<==============
I use Delmhorst blocks for annual crops like corn and beans and Watermarks
for perennials. My Delmhorst meter is nearing its lifes end and I hate to
have to buy another especially since I have a new Watermark meter. I read
the blocks with the Watermark meter and there appears to be a pretty good
correlation in the midrange but less so at the dry end. I was wondering if
there is a utility out there to convert Watermark readings to Delmhorst
readings???

Thanks for the time....Tom

=====================================================
Tom Thomson                          Northwest Agricultural Consulting
1275 Oak Villa Road                                  tomt@teleport.com
Dallas, Oregon 97338                            Phone/FAX 503-623-0468

"The only difference between a problem and a solution is that
everyone understands the solution." Charles Kettering
====================================================


===8<==============
NOTE:  To get off this list, send an email to list@sowacs.com
with the subject line:
unsubscribe_sowacs

For full instructions see this page:
<http://www.sowacs.com/subscribe/index.html>